Send us a model. We print it properly and post it to you.

Why send it here

Six things that come as standard on every order, whether it is one part or two hundred.

• 📐

  Tolerances checked before the run

  Fitted parts get a test coupon first, printed at 0.15, 0.20, 0.25 and 0.30 mm clearance on production settings. We lock the fit before committing filament to a full run, so assemblies actually go together.

• 🧵

  Material chosen for the job

  PLA for display pieces, PETG for anything that lives outdoors or takes load, ABS for heat, TPU for flex, resin for fine detail. If you are not sure, describe what the part does and we will tell you.

• 🔍

  Every part inspected before packing

  Layer adhesion, first layer, dimensional check against the model, and supports removed and cleaned up by hand. Anything that fails gets reprinted at our cost, not yours.

• 📦

  Tracked UK despatch

  Parts are packed to survive the courier, not just to fit the box. Tracked postage on every order and a photo of the finished part before it goes in the packaging.

• 🧊

  No model, no problem

  Send a sketch, a photo, a drawing or a broken original. We model it, send you a render to approve, then print. You own the resulting file.

• 🔁

  Repeat runs stay identical

  Machine, material batch and slicer profile are recorded against your order. Come back in six months and part two hundred matches part one.

How it works

Four steps from your file to a parcel. No account needed, no minimum contract.

1. 01

   Send the model

   Email an STL, STEP, 3MF or OBJ file. Tell us the quantity, roughly what the part does, and whether anything needs to fit something else. If you have no file, send a photo or a sketch with dimensions.

   your-part.stl

   part:      bracket_v3.stl
   quantity:  25
   purpose:   outdoor mount, takes light load
   fits:      22mm pole, needs a snug slide fit
   deadline:  none, but sooner is better

2. 02

   Get a quote

   We slice the file, check it for thin walls, trapped supports and unprintable overhangs, and come back within one working day with a fixed price, a material recommendation and a despatch date. If the model needs a change to print well, we say so and explain why.

   quote.json

   {
     "part": "bracket_v3.stl",
     "quantity": 25,
     "material": "PETG",
     "layer_height_mm": 0.2,
     "infill_pct": 40,
     "unit_price_gbp": 3.4,
     "total_gbp": 85.0,
     "despatch": "3 working days"
   }

3. 03

   We print it

   Approved orders go on a calibrated machine with a recorded profile. Fitted parts get a tolerance coupon first. Long runs are checked at the start, the middle and the end rather than only when they finish.

   profile.ini

   ; recorded against your order, reused on reruns
   material          = PETG
   nozzle_temp       = 240
   bed_temp          = 80
   layer_height      = 0.2
   perimeters        = 3
   fill_density      = 40%
   first_layer_speed = 20

4. 04

   Posted to you

   Supports removed, parts inspected and photographed, then packed and posted tracked. You get the tracking number and the inspection photo in the same email.

   despatch.txt

   order:     LW-0412
   parts:     25 of 25 passed inspection
   packed:    bubble wrap, double walled box
   service:   Royal Mail Tracked 48
   tracking:  sent by email on despatch